Dry removal of soot. For the dry removal of soot from water sensitive surfaces such as paintings, books, upholstery, wall paper, etc. The Chemical Sponge makes removal possible without damaging valuable items and also prevents soot from penetrating deeper as would be the case with a moist or wet treatment of same material.
Packaging: Piece Art. 150000
Chloride Quick Test
Qualitative determination of chloride contamination. For the quick, qualitative determination of chloride residues on surfaces such as metal, painted surfaces, plastics, etc. The Chloride Quick Test gives a quick insight to the presence of chloride contamination.
Packaging: Piece, Box with 30 test strips Art. 146000
Complex Deruster
Mild rust remover for the restoration of metal and machine parts.
Complex Deruster is a weakly acidic cleaner based on citric acid for mild derusting action. It is used everywere there are high demands on tolerances of metals and metal parts.
Contents: <5% nonionic surfactants, <5% NTA, perfume, acid, and water.
Specialty product for protection from corrosion during temporary storage in the restoration process.
Conserver is a corrosion inhibitor and water displacer. After the solvent evaporates it leaves behind a protective film for temporary storage. With one litre of Conserver approximately 100 – 150 m2 surface may be protected.
pH:Concentrate: not applicable Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging:Box of 4 x 5L Art. 97405
Application Methods:
Electro Cleaner - O
Non-conducting cleaner for electronic parts in fire damage restoration.
Solvent-based specialty cleaner for electronic parts. Its formulation makes it non-conductive thereby allowing time-saving application (no complete drying necessary) when chloride contaminations are not present.
Contents: ≥30% aliphatic hydrocarbons.
pH:Concentrate: not applicable Ready-to-use-solution: not applicable
Dilution: Apply undiluted.
Packaging:Box of 4 x 5L Art. 94405
Application Methods:
Electro Cleaner - W
Water-based cleaner for electronic parts in fire damage restoration.
Alkaline water-based specialty cleaner for electronic parts. This product is used instead of Electro Cleaner-O whenever chloride contamination is present.
Dilution: Dilute 1:6 to 1:30 with water and apply.
Packaging:Box of 4 x 5L Art. 94105
Application Methods:
Manophos
Rust remover, degreaser, bonderizer.
A strong, acidic cleaner with high rust, soil, and fat removing abilities. This product may also be used as a manual bonderizer.
Contents: Phosphoric acid, solvents, corrosion inhibitor, and water.
pH:Concentrate: 0.5 - 1.5 Ready-to-use-solution: depends on dilution ratio
Dilution: See label or Product Data Sheet.
Packaging:Box of 4 x 5L Art. 93805
Application Methods:
OEL 100A
Oil/Oil heater damage restoration product.
OEL 100A makes an effective removal on a variety of surfaces possible followed by complete separation and efficient disposal. This product is a fast emulsifier but the emulsion is only stable for a brief time. This allows for an effective removal of the oil with easy separation and suitable disposal.
Loose soot is fixated by applying Soot Fix. Smearing and circulation of soot is thereby prevented. This is especially advantageous in areas where removal is difficult or not possible.