The new CEBE® BENOVAC FE, with auto feed function as well as automatic discharge makes it ideal for use in water damage restoration, hard floor, and façade cleaning. The hard floor tool as well as the wall tool make it possible to clean with up to 80 bars of pressure while at the same time removing the cleaning solution - from vertical surfaces too. This enables the user to clean façades with a minimum of waste water and makes the construction of water capturing devices unnecessary. Both automatic feed and discharge enable one to clean large surface areas without the tedious carrying of water and waste water.
Technical Data
Dimensions: 71,1cm x 45 cm x 96,5 cm
Weight: 67 Kg
Vacuum: 2 x 2-stage (each 1020 W)
Pump: adjustable up to 80 Bar (1476 W)
Power (Circuit 1): 2124 W
Power (Circuit 2): 1956 W
Water Lift (closed): 3454 mm
Automatic Water Supply: at least 5/8” connection
Automatic Discharge: up to 94.6 litres per minute (600 W)
Waste water tank: 56.7 litres
Noise level: < 68 db(A)
Packaging: Piece Art. 230000
Floor Tool for Benovac FE
The Floor Tool and the Wall Tool both work based on the same principle: water is pushed through two jets which are angled with high pressure. This creates a rotational movement which add centrifugal mechanical action to the water pressure. This not only leads to more surface area being cleaned but the cleaning process also being more intensive. This strong mechanical action allows many surfaces to be cleaned with water alone. Whether fine stone ware or natural stone floors - even the grout is cleaned deeply without damaging it - the advantage of the rotational action.
Diameter: 32 cm
Distance between the two jets: 25 cm
Packaging: Piece Art. 231000
Wall Tool for Benovac FE
The wall tool is equipped with a rubber lip that makes it possible to clean vertical surfaces, rinse them and vacuum the wastewater without having to use a seperate recovery construction.
Diameter: 22 cm
Distance between jets: 15 cm
Packaging: Piece Art. 232000
Single Disc Machine Single 43
The Single 43 is easy to handle, robust and very versatile in its uses.
This machine has no torque and is easy to use and handle. The simultaneous oscillating and rotational motion makes the cleaning process on the carpet even more thorough and deep-reaching. The Orbiter has a completely free handle preventing any bending motions from the user. The Orbiter cleans all carpets and hard surfaces. The extensive accessories available allows bonnet pad cleaning and shampooing of carpets as well as scrubbing and polishing hard floors. The Orbiter is easy to handle and ideal for stain removal and cleaning small areas.