Machines and Accessories for Façade Cleaning - CEBE Reinigungschemie GmbH

Go to content

Main menu:

Machines and Accessories for Façade Cleaning

Products > Machines and Accessories
Benovac FE - Extraction machine for walls and hard floors from CEBE Reinigungschemie GmbH
Benovac FE
The new CEBE® BENOVAC FE, with auto feed function as well as automatic discharge makes it ideal for use in water damage restoration, hard floor, and façade cleaning. The hard floor tool as well as the wall tool make it possible to clean with up to 80 bars of pressure while at the same time removing the cleaning solution - from vertical surfaces too. This enables the user to clean façades with a minimum of waste water and makes the construction of water capturing devices unnecessary. Both automatic feed and discharge enable one to clean large surface areas without the tedious carrying of water and waste water.

Technical Data
Dimensions: 71,1cm x 45 cm x 96,5 cm
Weight: 67 Kg
Vacuum: 2 x 2-stage (each 1020 W)
Pump: adjustable up to 80 Bar (1476 W)
Power (Circuit 1): 2124 W
Power (Circuit 2): 1956 W
Water Lift (closed): 3454 mm
Automatic Water Supply: at least  5/8” connection
Automatic Discharge: up to 94.6 litres per minute (600 W)
Waste water tank: 56.7 litres
Noise level: < 68 db(A)

Packaging: Piece Art. 230000
Floor Tool for the Benovac FE from CEBE Reinigungschemie GmbH
Floor Tool for Benovac FE

The Floor Tool and the Wall Tool both work based on the same principle: water is pushed through two jets which are angled  with high pressure. This creates a rotational movement which add centrifugal mechanical action to the water pressure. This not only leads to more surface area being cleaned but the cleaning process also being more intensive. This strong mechanical action allows many surfaces to be cleaned with water alone. Whether fine stone ware or natural stone floors - even the grout is cleaned deeply without damaging it - the advantage of the rotational action.

Diameter: 32 cm
Distance between the two jets: 25 cm

Packaging: Piece Art. 231000
Wall Tool for the Benovac FE from CEBE Reinigungschemie GmbH
View from bottom: Wall Tool for the Benovac FE from CEBE Reinigungschemie GmbH
Wall Tool for Benovac FE

The wall tool is equipped with a rubber lip that makes it possible to clean vertical surfaces, rinse them and vacuum the wastewater without having to use a seperate recovery construction.

Diameter: 22 cm
Distance between jets: 15 cm

Packaging: Piece Art. 232000
Home | About Us | Products | Catalog | News | Service | Downloads | Contact | Imprint | Privacy Notice | General Site Map
Back to content | Back to main menu